Beszin 102233 Wall Mount Bracket Review
When you buy through the Amazon links on this page, we may earn a commission at no extra cost to you. Learn more
Last updated October 31, 2026
The Beszin 102233 wall mount bracket is worth it for one job: hanging a single shallow 1U device, like a switch or patch panel, where you want it to swing out for wiring access. Its about 0.08 in (2 mm) steel, 9.75 to 13.5 in adjustable depth and single-side hinge let you terminate cables without pulling the gear off the wall.
It fits a home lab, small office or wiring closet corner with one device and a wall that takes fasteners. Skip it for a UPS, a 1U server, more than one device, or if you need the hinge on a chosen side or won't supply your own wall hardware.
What the Beszin 102233 is
The Beszin 102233 is a 1U, 19-inch EIA wall-mount bracket with a single-side hinge and an adjustable depth arm, open-frame and made of steel with a black finish. One unit of rack space is 1.75 in tall and 19 in wide, so the bracket takes standard 19-inch rack equipment without adapters.
The hinged, extendable design means the depth is set once when you assemble the bracket. After that the loaded bracket swings out on its hinge so you can reach the rear of the device. It is not a slide-out rail. The advertised use is easy access to wires without unmounting components, and that is exactly what the swing gives you.
Mounting your switch and patch panel together on this Beszin bracket
About 0.08 in (2 mm) steel is genuinely thick for this class of bracket, so the plate and rails are not the weak point. The adjustable depth runs from 9.75 in to 13.5 in, which lets you set the bracket close to the wall for a shallow device or stand it further out for a deeper one, and clear baseboards, conduit or a backboard.
The swing-out action is the reason to choose this over a fixed bracket: you can dress and re-terminate cables at the rear without unscrewing the device from the rails. Standard 19-inch width and 1U height mean ordinary rack equipment mounts without adapters, and the black finish is RoHS compliant.
The bracket itself weighs about 3.00 lb (1.36 kg). Mounting screws come in the box for mounting the device to the bracket.
The product in this review
Beszin 102233 wall mount bracket
See on AmazonWhere the Beszin 102233 runs out of room for your gear
The sheet publishes no weight capacity, so treat the load conservatively. A 1U switch or a 24-port patch panel is well within reason. A 1U UPS or a loaded 1U server is not a sensible load for a single-side hinge.
Depth is tighter than it looks. The bracket reaches 13.5 in and accommodates a component up to 13 in deep, but that leaves little room behind the device for a power cord, an SFP module or a Cat6 boot. Plan on roughly 11 to 12 in of device depth for a comfortable fit, and measure your device including its plugs.
The hinge is on one side only. The bracket swings one way, so you must plan cable slack and clearance for the swing on that side, and keep the swing clear of a door or wall obstruction. The box contains mounting screws.
It is a 1U bracket with no room to add a second switch, a PDU or a shelf later. A rackmount UPS or a server exceeds what this bracket is meant to carry.
The measurements to check on the Beszin 102233 before you hang it
| Model / MPN | 102233 |
| UPC | 704817985146 |
| Type | 1U hinged extendable wall-mount bracket, 19-inch EIA |
| Width | 19 in |
| Height | 1.75 in (1U) |
| Depth | adjustable, 9.75 in to 13.5 in |
| Maximum component depth accommodated | 13 in |
| Material | steel, 0.08 in (2 mm) thick |
| Finish | black |
| Weight | 3.00 lb (1.36 kg) |
| Compliance | RoHS |
| Included | mounting screws (six M5 × 12 rack screws) |
| Compatible devices | server (per the sheet's category) |
The 19-inch width and 1.75-inch height are what let a standard switch or patch panel bolt straight in. The 13-inch component depth is the figure to check against your own gear before ordering, and the 3.00 lb (1.36 kg) weight is the bracket alone, not the load it carries.
The Beszin 102233 is a well-made, thick-steel 1U hinged bracket that does one job well: a single shallow device on a wall with swing-out access, provided you supply wall hardware and keep the load light. If you might add a second device, need a reversible hinge, or plan to hang anything deep or heavy, this 1U bracket is the wrong shape for the job.
Before ordering, check your device's depth including plugs against the 13-inch figure.
Frequently asked questions
A 1U bracket lives or dies on two numbers, the depth of the device it holds and the strength of the wall behind it, and both are worth checking before the box arrives.
Is the Beszin 102233 wall mount bracket sold as a single bracket or as a pair?
One bracket ships per order, so the Beszin 102233 gives you a single 1U position on the wall rather than a pair of rails.
How deep a switch or patch panel fits the Beszin 102233 wall mount bracket?
A switch or patch panel up to 13 in deep fits the Beszin 102233, and the depth arm adjusts from 9.75 in out to 13.5 in to line up with it.
Can the Beszin 102233 wall mount bracket carry a loaded 1U server or a rackmount UPS?
Beszin publishes no weight capacity for the 102233, and a bracket that hinges on one side is meant for light, shallow gear such as a switch or a patch panel, so a loaded 1U server or a rackmount UPS is more than it should hold.
What hardware does the Beszin 102233 wall mount bracket include for attaching it to the wall?
The Beszin 102233 includes six M5 × 12 rack screws for mounting the device to the bracket, but it includes no wall-attachment hardware, so you supply lag bolts or anchors matched to your wall.